manualshive.com logo in svg

POLA Xfarm, User Handbook Manual

Share
Download
POLA Xfarm User Handbook Manual Download Page 14

14

B.   Alarm

Path: 

Home

>

 : 

is displayed the current Alarm Status.

No alarm is running now. Alarm is anyway enabled.

Internal battery voltage failure.
Warning: in this case proper functionning of program is not sure.

Alarm silenced (but ready to start again in case of new alarm conditions).

Delay in alarm

 intervention: one or more alarms are activated.

After 30 seconds the current alarm will be 

activated.

Alarm is running now

: 

one or more alarms are activated.

The icon displayed on top of

 

 

key gives the situation of the alarm

:

 this icon is also shown in the upper

left corner in all scre

enshot (with 

exception of 

 icon).

  B. Alarm

Alarm is ON:

Max 10 alarms are simultaneously disp

layed (for the complete list see par. E.1).

Note:

a Climate alarm is displayed and recorded. Alarm relay is activat

ed.

a Feeding  alarm is only displayed 

and recorded. Alarm relay

 isn’t activat

ed.

Silent
Alarm

Active
Alarm

B.C

B.E

B.F

See paragraph

B.D

Summary of Contents for Xfarm





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands