Point Six Link Manager 4010-43, Manual

Page: 61 / 131

Link Manager Manual Commands

59
‘CIP’- Configure TCP/IP Ports
Command Options CIP<S|R>
S
– set the TCP/IP ports
R – read the TCP/IP ports settings
Command/Response Syntax
Command: CIPS httpport, cmdport
Response: CIPS httpport
Command: CIPR
Response: CIPR, httpport, cmdport
Parameters
Where:
httpport – the http port (web page port) (default: 80). If set to 0 then the web
page is not accessible.
Cmdport – the command TCP/IP port (default: 1000). If set to 0 then the
TCP/IP command port will not respond.
Login Level
Login Level: CIPS – Configure
CIPR – Data
Description
Great care must be taken when using this command. You can unintentionally change
these setting in such a way that you may not be able to access the Link Manager via
TCP/IP.
Note: The set parameters will not take affect until the current connection for the
effected media is closed. If the media is not connected then the parameters will take
affect right away. The connection can be closed by the host closing the connection,
inactivity time has expired, power down/up or the “LOC” command being received.
Examples
Command: CIPS0,0
Response: CIPS0
Remarks: Turn off listening of HTTP and TCP/IP Command ports.