106
Commands
Link Manager Manual
‘L’ – Login/Logout Commands
Command Options
LI
LO[C]
Command/Response Syntax
Command:
LI
password
Log in command
Response:
LI
password
,
level
Command:
LO
Log out command
Response:
LO
Command:
LOC
Log out command and disconnect
Response:
LOC
Parameters
Where:
password
– either a data or configure password as set up with the
Configure Login Password (‘CPD’ and ‘CPC’). The password
parameter for this command is case sensitive.
level
– level of access authorized by the Link Manager: 1 – ‘Data’; 2 –
‘Configure’
Login Level
Login Level:
none
Description
Link Manager will allow access to a set of commands based on the entered
password. There are two levels of access ‘Data’ and ‘Configure’. With the ‘Data’
login, a user can access the current readings, the I/O Status page, Activity Log and
other information. With the ‘Data’ login, the Link Manager will not allow access to
commands or Web page that change the setup information. With the ‘Configure’
login, the Link Manager will allow all commands to be processed.
For the “LI” command, if the password does not match the Data or Configure
password the Link Manager will return a 17 error code.
The “LOC” command causes the Link Manager to log out and then close the
connection.
Note: Login is case sensitive.
Note: If you forget your password, you will not be able to collect the data in the Link
Manager. You will have to reset the Link Manager to factory defaults and set up
new passwords.
Example
Command:
LInow
Response: LInow,1
Remarks: Login using the password “now”. Logged in at level 1 which is
the “Data” login level.
Summary of Contents for Link Manager 4010-43
Page 2: ......
Page 6: ...4 Introduction Link Manager Manual ...
Page 9: ...Link Manager Manual 7 ...
Page 116: ......
