PAIRING
10
To Pair the Smart Display to your Radar Module
for wireless operation, follow the steps below:
1. Use the supplied USB cable to temporarily connect the Smart
Display directly to your Radar Module by wired connection.
2. Hold down both the red and black buttons at the same time on
the Smart Display for 2 seconds to enter the advanced menu.
3. Release both buttons when ‘
BLE
’ is displayed. The display will
continuously flash ‘
BLE
’ while the pairing operation is in process.
4. Once the “BLE’ turns solid and stops flashing, the Smart
Display is then paired with the Radar Module and can be used
wirelessly.
PRO RADAR MODULE
™
PAIRING
