- 11 -
4.
Tighten the hand screw
Before tightening the hand screw, make sure the lens is centered. The Rear Tilt 'n'
Shift Frame is made so that it has some play in the longitudinal direction. Slide the
lens a little forward, so that the focus ring does not touch the rear tilt 'n' shift frame
and has a distance of about 0.5mm to it. Then you can tighten the screw
by hand
(do not use a tool!).
Summary of Contents for Rear Tilt 'n' Shift Frame
Page 22: ... 22 Space for your own notes ...
Page 23: ... 23 ...