POCKET PANO Rear Tilt 'n' Shift Frame, Operation Manual

Page: 15 / 24

- 15 -
Basic rule: To set a particular locking angle, all click-stop elements must be
activated which have the desired angle label. All other locking elements must be
deactivated .
example: If you want to set a locking angle of 20° on the rotator, activate all click-stop elements (screw
to the left) which have the marking "20°" (3 pieces). All other click-stop elements must be deactivated
(screw to the right).
The angle between the individual images should be adjusted so that an overlap of
identical image areas of approx. 30% - 50% results. The following table gives an
overview of meaningful locking angles:
Camera in portrait mode Camera in landscape mode
TS-E 17mm f/4L 3x 15° OR 2x 20° 60°
TS-E 24mm f/3.5L II 30° 3x 15° OR 2x 20°
Note: "3x 15° " means that the rotator is set to 15° locking angle and a picture is
taken every 3rd click (resulting in 45° angle).