(15) Voice function (VOICE) - MENU No. 14
With this function, you activate a voice that informs you about any operation/ selection you are doing.
(16) ANI-ID (ANI-ID) - MENU No.15
With this function you can set your ID-code. It can be programmed by the proper programming software. You can edit up to
5 digits.
(17) DTMFST (DTMFST) - MENU No.16
Determines when DTMF Side Tones can be heard from the transceiver speaker.
(18) Signal code (S-CODE) - MENU No.17
Selects 1 of 15 DTMF codes. The DTMF codes are programmed with software and are up to 5 digits each.
(19) SCAN Resume Mode (SC-REV) - MENU No.18
Thanks to this function, UV-5R PRO can SCAN in frequency or channel mode. You can choose amongst three options:
TO: Time-operated SCAN
Whenever a signal is detected, the radio will suspend the SCAN for 5 seconds, and then will continue to SCAN even if the
signal is still present.
CO: Carrier-operated SCAN
Whenever a signal is detected, the radio will stop scanning. It will resume to SCAN once the signal will disappear.
SE: Search SCAN
The radio will stop scanning once a signal is detected.
(20) PTT-ID (PTT-ID) - MENU No.19
With this function you can decide when sending the ANI-ID code in tx mode.
