background image

To protect you against any property loss, bodily injury or even death, be sure to observe the following safety instructions: 
1.

 

Do not charge or replace your battery in a location containing fuels, chemicals, explosive atmospheres and other 

flammable or explosive materials. 

2.

 

Do not charge your battery that is wet. Please dry it with a soft and clean cloth prior to charge. 

3.

 

Do not charge your battery suffering deformation, leakage and overheat. 

4.

 

Do not charge your battery with an unauthorized charger. 

5.

 

Do not charge your battery in a location where strong radiation is present. 

6.

 

Overcharge shall always be prohibited for it may shorten the life of your battery. 

Maintenance Instructions 

To help your battery work normally or prolong its life, be sure to observe the following instructions: 
1.

 

  Accumulated dust on charging connector may affect normal charging. Please use a clean and dry cloth to wipe it on a 

regular basis. 

2.

 

  It is recommended to charge the battery under 5

~40

. Violation of the said limit may cause battery life reduction or 

even battery leakage. 

3.

 

  To charge a battery attached to the product, turn it off to ensure a full charge. 

4.

 

  Do not remove the battery or unplug the power cord during charging to ensure a smooth charging process. 

5.

 

  Do not dispose of the battery in fire. 

6.

 

  Do not expose the battery to direct sunlight for a long time nor place it close to other heating sources. 

7.

 

  Do not squeeze and penetrate the battery, nor remove its housing. 

Transportation Instructions 

1.

 

Damaged batteries must not be transported. 

2.

 

To avoid short circuit, separate the battery from metal pars or from each other if two or more batteries are transported in 

one packaging. 

3.

 

The radio must be switched off and secured against switch-on, if the battery is attached. 

The content of the shipment must be declared in the shipping documents and by a Battery Shipping Label on the packaging. 

Summary of Contents for G5R




















































Reviews: