13
See the following section “Connect to ProVision” to complete the setup.
Cellular communications
The Tensor cell model can communicate with ProVision over a cellular communication connection.
The Cell Tensor is assigned a network IP Address by the Cell Plan Provider. ProVision is then configured with
the network IP address to access the Cell Tensor.
When connected to ProVision, the recorder serial number will appear in the Devices column.
The Tensor Recorder and ProVision are now ready to initialize or download.
For questions and instructions on cellular connectivity, refer to the ‘Frequently Asked Questions’ at the end
of this manual.
A Tensor with the cellular option can send bursts of recorded data to the PQ Canvass website. A contract for
PQ Canvass can be purchased through you PMI Sales Representative.
For additional assistance, contact the PMI Technical Support Team.
Connect to ProVision
After the Tensor Wi-Fi or Cellular IP address is configured in ProVision,
select the
[Recorder]
tab in ProVision
followed by the
[Connect]
command. Select the new connection to link the Tensor to ProVision.
