PMA Digital 280-1, Operating Manual

Page: 24 / 52

5.2 Configuration
Dependent of instrument version and configuration, spare parameters are not dis-
played.
Func
name value range description default
Fnc.1
function 1 0
0 no function
1 tare - function
2
sample & hold
3 O2 - measuring
Fnc.2
function 2 0
0 indicator
1 controller
C.Fnc
controller behavior (algorithm) 1
0 on/off controller e.g. signaller with one output
1 PID-controller (2-point and continuous)
C.Act
operating principle of the controller 0
0 inverse, e.g. heating
1 direct, e.g. cooling
rnG.L
-19999...99999 X0 (lower controlrange limit) 1 -100
rnG.H
-19999...99999 X100 (upper controlrange limit) 1 1200
1 rnG.L and rnG.H indicate the control range to which self-tuning refers.
InP
name value range description default
S.tYP
sensortype
1
0 thermocouple type L (-100...900°C), Fe-CuNi DIN
1 thermocouple type J (-100...1200°C), Fe-CuNi
2 thermocouple type K (-100...1350°C), NiCr-Ni
3 thermocouple type N (-100...1300°C), Nicrosil-Nisil
4 thermocouple type S (0...1760°C), PtRh-Pt10%
5 thermocouple type R (0...1760°C), PtRh-Pt13%
6 thermocouple type T (-200...400°C), Cu-CuNi
7 thermocouple type C (0...2315°C), W5%Re-W26%Re
8 thermocouple type D (0...2315°C), W3%Re-W25%Re
9 thermocouple type E (-100...1000°C), NiCr-CuNi
10 thermocouple type B (0/100...1820°C), PtRh-Pt6%
18 thermocouple Sonder (linearization necessary)
20 pt100 (-200.0 ... 100,0 °C)
21 pt100 (-200.0 ... 850,0 °C)
22 pt1000 (-200.0...8500.0 °C)
23 special 0...4500 Ohm (preset to KTY11-6)
24 special 0...450 Ohm (scaling necessary)
30 0...20mA / 4...20 mA (scaling necessary r page 36)
40 0...10V / 2...10 V (scaling necessary r page36)
41 special (-2,5...115 mV scaling necessary r page36)
42 special (-25...1150 mV scaling necessary r page 36)
Configuration level
24 Configuration Digital 280-1