Plustek V1.2, User Manual

Page: 19 / 44

11
Figure 2. Flatbed Scanner
4. Open the document cover and place a picture onto the
scanning window face-down.
5. Next go to the scanner’s programme group and open the
Scanner Utility .
6. Click on the Lamp Control tab located at the bottom of the
dialogue box.
7. While looking at the scanner, click on the Turn on Lamp
and
Turn off Lamp
icons (see Figure 3). This test checks to
see if the scanner’s light source is properly working.
8. Slowly close the document cover.
Document Cover
Scanning Window
Place a picture at the
back of scanner and
face-down.