manualshive.com logo in svg

Plustek V1.2, User Manual

Share
Download
Plustek V1.2 User Manual Download Page 14

6

B

efore installing the scanner’s software, make sure that the

scanner is properly connected as described in 

Chapter I,

Hardware Installation,

 page 1.

Software Installation Requirements

Your scanner comes bundled with OCR software, image-

editing software, the scanner’s driver, and TWAIN software. The

scanner’s software uses approximately 40 megabytes of hard disk

space after it is installed to your computer. For Setup to properly

install the scanner’s software it is recommended that you have

over 100 megabytes of available hard disk space. 

Note:

 The 100

megabyte free hard disk space requirement is necessary so the

installation will have plenty of room to perform its swapping

routines. Otherwise, you might receive error messages during the

installation.

Software Installation

The installation programme called 

Setup/Application CD-

ROM

 must be run from within Microsoft 

Windows

™

. Once

Windows is running on your system, please follow the steps

below to properly install the software:

1. Insert the installation CD-ROM into its disc drive.

2. If using Windows 95, click on START and RUN. If using

Windows 3.1x, from Programme Manager choose FILE and

RUN.

3. In the Open field, or Command Line if using Windows 3.1x,

enter the letter of your disc drive followed by 

SETUP.EXE

Summary of Contents for V1.2













































Reviews:

No comments

Brands by name

Popular brands

Load more brands