Plustek SmartOffice PS283 User Manual Download

Page: 6 / 45

4. Damaged wire could cause fire or electrical shock. Keep the power cord straight

and without being twisted, bended, or scraped.

Unplug this device if you don’t need to use for a certain period of time, such as,
during night or long weekend, to avoid any risks of causing fire.

6. Do not attempt to disassemble the scanner. There is danger of an electrical shock

and opening your scanner will void your warranty.

7. Be sure not to bump or knock the scanner glass as it is fragile and could break.

8. Do not subject the scanner to excessive vibration. It may damage the internal

components.

INIMUM

YSTEM

EQUIREMENTS



PC with Intel Pentium® IV 2.4 GHz processor or compatible



1 GB RAM



Available USB 2.0 port



DVD-ROM Drive



2 GB Free Hard Disk Space



Video card that supports 16-bit color or greater



Operating System: Microsoft Windows XP / Vista / 7 / 8 / 10

Information

Systems with 2 GB RAM and 3 GB free hard disk

space

are

recommended

for

optimal

performance.

Higher requirements may be needed when scanning or editing large quantities of images. The

system requirements stated are only a guideline, generally the better the computer (motherboard,
processor, hard disk, RAM, video graphic card), the better the results.

Summary of Contents for SmartOffice PS283














































Search results

Summary of Contents for SmartOffice PS283

Reviews:

Related manuals for SmartOffice PS283

Brands by name

Popular brands

Plustek SmartOffice PS283, User Manual

Search results

Summary of Contents for SmartOffice PS283

Reviews:

Related manuals for SmartOffice PS283

Brands by name

Popular brands