34
5. Click on the
Start
button to begin the calibration process.
6. The scanner pulls the calibration sheet through the scanner, which completes
this scanner calibration. After the calibration is complete, click
OK
and then
click
Finish
.
P
OWER
S
AVE
To save power consumption, when the scanning process is finished, the scanner
light source will turn itself off and the scanner will enter a lower-power mode without
delay time.
Information
You may disable the standby mode
8
or define
an idle time for the scanner to automatically
enter the standby mode. You may press any
scanner button to wake up the scanner from
power saving.
From the Windows
START
menu, point to
All
Programs
>
Your Scanner Model Name
,
and then click
Scanner Utility
9
. (For
Windows 8.1 users: Point your mouse cursor
to the upper or lower right corner of your
screen to open the
Charm
bar. Click on the
Start
charm, then click on the downwards
arrow button in the lower left corner of the
screen. The
Apps
screen will be shown.
Move your cursor to the right edge of the
screen to scroll right until you find
Your
Scanner Model Name
, and then click on
Scanner Utility
.) Refer to the online help of
Scanner Utility to explore more about
standby mode.
8
This function may or may not be available depending on the scanner model you purchase.
9
Scanner Utility is not included in all scanner models.
