Plusmed PM-B51 PLUS, Instruction Manual

Page: 12 / 44

c) When the measurement has been concluded,
The measured systolic and diastolic blood-
pressure values as well as the pulse frequency are now displayed.
Example (Fig.): Systole 118, Diastole 73, Pulse 75
The measurement results are displayed, until you switch the device off. If no button is pressed
for 3 minutes, the device switches automatically off, to save the batteries.
4.5. Discontinuing a measurement
If it is necessary to interrupt a blood pressure measurement
for any reason (e.g. the patient feels unwell), the “ ON/OFF ” button
can be pressed at any time. The device then immediately
lowers the cuff-pressure automatically.
4.6. Memory – storage and recall of the measurements
The blood-pressure monitor automatically stores each of the
last 120 measurement values.
By pressing the MEMORY button, an average value of the last
3 measurements as well as the last measurement (MR1) and the
further last 120 measurements (MR2, MR3, ..., MR120) can be displayed
one after the other.
(MR1: Values of the oldest measurement)
(MR2-MR120: Values of the measurement before MR1)
10