Starting up UPIC Touch&Draw
1
Start up UPIC Touch&Draw.
There are three ways to start up this software.
• The software can be started up by clicking
[Start]
→
[All Programs]
→
[UPIC]
→
[UPIC
Touch&Draw] on the computer.
• UPIC Touch&Draw can be started up by double-
clicking the software’s
icon on the Windows
desktop.
• UPIC Touch&Draw can be started up by dou-
ble-clicking the file saved using the software’s
“Save” command (extension .tad).
NOTICE
• If connection to the digital pen is not possible,
the message “The digital pen is not connect-
ed. Connect the digital pen before starting up
UPIC Touch&Draw.” appears.
Click [OK] to close the message.
Once the digital pen is connected, start UPIC
Touch&Draw back up. See “Pairing the digital
pen and computer” on page 20.
Starting up and quitting UPIC Touch&Draw