The back surface of the wireless interactive panel (referred to simply as “the panel” below)
is a magnetic layer. Mount it on a metal surface that will not yield when force is applied.
Below are some examples for your reference.
• Whiteboard (in steel)
• Steel wall or steel panel
Mounting the panel
This description is for mounting the panel on a whiteboard (in steel).
For proper mounting, this procedure should be performed by two people.
Clean the surface of installation.
Before mounting, wipe clean the surface on which the panel is to be mounted. Any dirt, pieces
of cellophane tape, etc., will cause the panel surface to be uneven. If you wipe the surface with a
damp cloth, wait until it dries.
Attach the panel flatly against the surface of installation.
With the panel still rolled up, line it up carefully.
Now, unwind the holding bar to the left or right, attaching the panel flatly to the mounting surface
(making sure no air remains between it and the surface of installation) as you go. If after mounting
any air is still trapped, eliminate it by wiping the panel gently with a piece of cloth, etc.
NOTE
• Check that the panel is securely mounted and does not come off.
• To reattach it, first wind it up onto the holding bar, then start over.
Installing the wireless interactive panel
