UNUM VEP4600 Appliance - Getting Started Guide - Copyright © 2020 by Pluribus Networks. All Rights Reserved.
Page 44 of 60
UNUM VEP 4600 Configuration (cont'd)
Inputs for vNV 1
·
Enter VM name for vnv 1 [vnv-vm_1]:
Enter name or use default value
·
Enter fabric to join on vNV 1 [ ]:
mgmt-ureg
(example only)
·
Enter vNV connection mode for vnv-vm_1 - management/inband [management]:
Inputs for vNV 2
·
Enter VM name for vnv 2 [vnv-vm_2]:
Enter name or use default value
·
Enter fabric to join on vNV 1 [ ]:
inband-ureg
(example only)
·
Enter vNV connection mode for vnv-vm_1 - management/inband [management]:
inband
·
Enter vSwitch name for inband_vnv [vnv-switch_2]:
·
Available vmnics:
vmnic0 vmnic1 vmnic2 vmnic3 vmnic4 vmnic5 vmnic6 vmnic7
vmnic8
·
Enter up to 2 vmnic(s) connected to inband-ureg separated by comma:
vmnic2
·
Enter portgroup for vSwitch vnv-switch_2 [VmDataNet]:
·
Enter VLAN for port group [0/4095/VLAD-ID]. Note setting VLAN to 0 indicates None; 4095 indicates
All (0-4095) [ ]:
·
Enter inband IP/mask for inband_vnv:
172.18.201.101/24
