UNUM VEP4600 Appliance - Getting Started Guide - Copyright © 2020 by Pluribus Networks. All Rights Reserved.
Page 23 of 60
UNUM VEP 4600 Configuration (cont'd)
2.
Activate VMware License using the steps illustrated below.
Note:
A DHCP server must be running for an automatic IP address assignment during ESXi configuration;
otherwise, manually assign a static IP addresses for
UNUM
and
vNV
. Please refer to the relevant
documentation at https://www.pluribusnetworks.com/support/technical-documentation/.
3.
Configure ESXi and create a new Virtual Machine (VM) using the configuration examples illustrated
below.
4.
Connect to the UNUM host via a terminal session using SSH (using the assigned IP address) and run the
following script:
./unum_provision_sh
(requires DHCP to run)
5.
Deploy a standalone VM.
