14
4. Display Status
continued
5. Input Select Menu
1. Audio Level Meter Display
Set “ON/OFF” and “ Position” from the Audio Level Display Menu.
On: Left (even channel), Right (odd channel), OFF : Hide Level Bar
Level Meter Position: Position audio display at the top or bottom of the screen.
2) Waveform Monitor/Vector Scope Display
Set “ON/OFF” and “Position” from the W-FORM/VECTOR Button WFM/Vector Position : Position
Waveform/Vector from Display Menu( Left Top, Right Top, Left Bottom, Right Bottom)
(These functions are available only in SDI, CVBS, S-Video, YPbPr Mode).
Display Position is can be toggled when Up( ) button is pressed.
3) Time Code Display (SDI Input Mode)
Set “ON/OFF” and “Position” from Display Menu Setup.
Time Code Position : Position Time Code at the top or bottom of the screen.
These buttons are used to select desired video input or
to convert the corresponding video input. Information for
selected input signal can be viewed for 3 seconds through
Mode Display Window displayed at the left top of the screen.
When Menu control is not ON, if user press Enter button, then
currently selected input information appears.
When changing the input signal, there is a possibility that the signal will not be detected,
or the mode indication may be incorrect, or the screen size may be displayed incorrectly.
INPUT MODE DISPLAY
