3. Controls
3-1. Front Panel
14
2 3 4
5 6 7 8
9
10 11 12 13
1
Front Push Buttons
PBM–070
1
STANDBY
Power ON/OFF Button.
2
SDI INPUT SELECT
This is for selecting SDI Input. Additional OSD LOGO is displayed.
3
CVBS 1, CVBS 2, CVBS3 Y/C (S-VIDEO) INPUT SELECT
This is for selecting CVBS & S-Video Input. Additional OSD LOGO is displayed. Each time the user presses
this button, it converts CVBS1,2,3 Mode.
4
YPbPr, RGB INPUT SELECT
This is for selecting YPbPr, RGB (Components) input.
Each time the user presses this button, it converts YPbPr(YUV), RGB Mode.
5
DVI / VGA INPUT SELECT
This is for selecting DVI / VGA Input. Additional OSD LOGO is displayed.
6
SCAN
Selects Zero Scan , Under Scan, Over Scan, Zoom Mode.
(SCAN LED is ON when Over Scan Mode is activated)
7
BLUE/GRAY ( )
1) Display color is only shown with Blue or with Luminance (Color off)
Each time this button is pressed, the display mode changes
2) When W-FORM/VECTOR Mode is activated, this button is used to change the position of Waveform,
Pixel to Pixel.
8
W-FORM/VECTOR
1) When this button is pressed, Display Color is shown as a format of Waveform or Vector Scope. Each
time this button is pressed, it converts each mode.
These functions are available only in SDI, CVBS, S-Video, YPbPr Mode.
9
FUNCTION 1 (F1, F2)
Functions are assigned from the SYSTEM menu. They are operated by the F1, F2 Buttons Please refer to
section “3-4 Front. Function for F1,F2.”
8
