Plum ecoMAX 200 W, Operation And Maintenance Manual

Page: 4 / 27

4
1 Safety
Safety requirements are
specified in individual sections
of this manual. Apart from
them,
the following
requirements should in
particular be applied:

Before starting assembly,
repairs or maintenance, as well
as during any connection
works, please make sure that
the mains power supply is
disconnected and that terminals
and electric wires are devoid of
voltage.

The regulator cannot be used at
variance with its purpose.

Additional automatics which
protects the boiler, central
heating system, and hot utility
water system against results of
malfunction of the regulator, or
of errors in its software.

The regulator is not an
intrinsically safe device, which
means that in the case of
malfunction it can be the source
of a spark or high temperature,
which in the presence of
flammable dusts or gases can
cause fire or explosion. Thus,
the regulator should be
separated from flammable
dusts and gases by means of
an appropriate body.

The regulator is to be enclosed
in a boiler, or near it.

The additional thermal
safeguard, applied in the
regulator, does not function as
a safety temperature limiter.
Therefore, it cannot be used
instead of a safety temperature
limiter!

The value of the programmable
parameters should be selected
appropriately to the parameters
of the given boiler and the
given fuel, considering all the
system operation conditions.
Incorrect selection of the
parameters can cause
malfunction of the boiler (e.g.
overheating of the boiler, etc.).

The regulator is intended for
boiler manufacturers. Before
applying the regulator, a boiler
manufacturer should check if
the regulator‟s mating with the
given boiler type is proper, and
whether it can cause danger.

The regulator must be installed
by a boiler manufacturer in
accordance with the applicable
safety standards.

The programmed parameters
should only be altered by a
person familiarized with this
manual.

The device should only be used
in heating systems in
accordance with the applicable
regulations.

The electric system in which the
regulator operates must be
protected by means of a fuse,
selected appropriately to the
applied loads.

The regulator cannot be used if
its casing is damaged.

In no circumstances can the
design of the regulator be
modified.

It can be used in a household
and similar facilities, as well as
in
slightly industrialized
facilities.

Keep the regulator out of reach
of children.