Plockmatic MPS XL, Operating Instruction

Page: 17 / 44

17
2. Control Panel
Control Panel
The following section will guide the user through the Control Panels functions.
LED bar
LED bar
LED bar can show various information
about the Stacker.
Table positioning lever
Table positioning lever
This lever allows the user to move the
Stacker Table up and down.
Secondary use:
If more than one fault code is triggered
the additional fault code(s) can be viewed
by toggling the Table Positioning Lever (5.
Troubleshooting - Reading the fault code).
NOTE:
While printing, this lever will be disabled.
Pause / Resume button
Pause / Resume button
While printing, the user can push this button
to pause the job.
When the button is pushed, the stacker will
send a soft stop to the printer and the status
light on the control panel will blink blue.
To resume printing, press the button again.
Continued on next page...
NOTE:
Additional sheets might be printed while
the press clears the paper path.
• Fan speed (see Fan speed adjustment)
• Software version (see Software version)
• Sheet counter (see Sheet counter)
• Fault/warning codes (see Section 5 -
Fault codes)
NOTE:
When running LED bar displays Fan speed.