Plextor PX-850A, Installation And User Manual

Page: 34 / 248

Section 2. Installing the PX-850A Internal PATA Drive
26
PX-850 Installation and Users Manual
About Cable Select
The Cable Select jumper position sets the PX-850A drive to use the
CSEL signal from the IDE interface for configuration purposes. This
signal automatically selects the correct Master/Slave setting for the
drive.
Figure 12: Configuring the PX-850A drive for Cable Select
To use CSEL, you must have:
•
A computer that supports CSEL.
•
An IDE cable that supports CSEL (Cable Select). The 80-conductor
IDE/ATA cable from Plextor supports CSEL.