Plextor PlexWriter 40/12/40A, Installation And User Manual

Page: 43 / 56

PlexWriter 40/12/40A Installation and Users Manual
37
Appendix A: PlexWriter Specifications
Minimum System Requirements
Computer Pentium II 300 MHz CPU or faster.
Minimum RAM 64 MB
Hard Disk Size 1 GB of free space to write to a CD in image mode
ATAPI Settings DMA should be set to ON in operating system software.
IDE controller should be set to PIO Mode4/DMA Mode2
or Auto in the motherboard BIOS.
Operating System Windows XP, Me, 2000, 98, 95
Recommended Media
ƒ
CD-R: 40X To ensure 40X write speed, Plextor recommends using
only certified 40X media available from Maxell or
Mitsubishi Chemical (Verbatim)
(With PoweRec, some discs may be recorded at 16X
because of lower quality media.)
Note: For the latest updated list of certified 40X media,
see Plextor’s web site at:
http://www.plextor.com
ƒ
CD-R: 32X, 24X Ricoh, Mitsui, Maxell, Taiyo Yuden, Mitsubishi Chemical
(Verbatim)
ƒ
CD-R: 24X Ricoh, Mitsui, Mitsubishi Chemical (Verbatim), Taiyo
Yuden, Maxell
ƒ
CD-R: 20X-4X Ricoh, Mitsui, Mitsubishi Chemical (Verbatim), Taiyo
Yuden, TDK, Maxell, Kodak
ƒ
CD-RW: 12X Ricoh
ƒ
CD-RW: 10X-4X Ricoh, Mitsubishi Chemical (Verbatim)
(All CD-RW media are rewritable up to 1,000 times.)
Supported Media
Supported Media,
Stamped CD
Red, Yellow Book-compliant discs
Supported Media, CD-R
Orange Book Pt II-compliant discs (Type 74, Type 80)
Supported Media,
CD-RW
Orange Book Pt III-compliant discs
Supported Media Size 12 cm