Termination
YOUR TASK:
Find the location of the terminator(s) on your drive.
YOUR OBJECTIVE:
Determine if your drive must use a terminator(s).
YOUR METHOD:
Find location of terminator(s) by checking diagrams
in Chapter 5. If necessary, remove them by
following instructions given below.
You must use a terminator if the PX-43CH or PX-45CH is the only SCSI peripheral
used with your computer. In addition you must use a terminator if you are using
multiple SCSI peripherals with your computer, and the PX-43CH or PX-45CH is
positioned as the
last
peripheral in a daisy chain.
Any SCSI peripherals which are positioned between your SCSI host adapter and the
last
peripheral in a daisy chain should have their terminators turned OFF. Consult the
manuals of these peripherals for the proper method of turning their terminators OFF.
Remember: Only the
last
SCSI peripheral in a daisy chain should have its terminator
turned ON. If you have any SCSI devices chained
after
your PX-43CH
or PX-45CH, you must turn OFF the PX-43CH’s or PX-45CH’s termina-
tion.
---- CHAPTER 7 ----
18
PX-43CH/PX-45CH OPERATION MANUAL
