PX-45CH External Drive
Rear Panel
➊
SCSI ID:
Use this dial to designate SCSI ID number. Rotate the dial to change the
number.
➋
AC Power Input:
Use the power cord supplied with your drive.
➌
Power Switch:
To turn power ON/OFF.
➍
DIP Switches:
Use to set parity, auto, test, block size and eject lock options. Leave
these switches at their factory settings unless either or both of the following situations
pertains to you:
Block size:
If you are working in a UNIX environment and want to boot from your
CD-ROM drive, see page 17.
Eject Lock:
If you work in an environment where you need to prevent others from
removing a CD-ROM disc from your drive, see page 17.
➎
Audio Output:
Outputs stereo analog signal via RCA jacks. Use to connect to
audio amplifier or other audio equipment.
➏
SCSI Interface Connector I and II:
One connector should be used to link your
CD-ROM drive to your SCSI host adapter; the other to link your CD-ROM drive to
another SCSI peripheral with a daisy chain cable (see page 31). You may use either
connector for either purpose.
➊
SCSI ID
➋
AC Power Input
➌
Power Switch
➏
SCSI Interface
Connector I and II
➎
Audio Output (RCA jacks)
➍
DIP Switches
CHAPTER 5 ---- Drive Features
12
PX-43CH/PX-45CH OPERATION MANUAL
