49
MURPHY BED LAYOUT
The bed support cross members are located on the bottom of the
passenger side Murphy bed.
1. Lift the lock on the front retainer lid for the bed cross
members holder and rotate the lid out of the way.
2. Lift the cross member out of the front retainer and slide the
cross member out of the rear support.
3. Place both the front and rear cross members into the
retaining holes, post down at the front and rear of the
passenger and driver side cabinets.
4. Release the yellow safety strap from the driver and
passenger side Murphy beds and fold them down.
5. Fold the side cushions in half and place them on top of the
cabinet to provide a flat- bed surface. The side cushions
must be stood unfolded when the bed is stowed.
WARNING:
Never lower the Murphy beds without the cross
members in place.
WARNING:
Always ensure the yellow safety strap is latched to
the side rail when the Murphy beds are in the stow position.
