48
TABLE
The Lagun Table leg system is constructed of heavy anodized
aluminum, and swivels around in the front seating area.
1. Remove the table and table leg from behind the driver seat.
2. Remove the table leg from the base of the table by loosening
off the black locking handle.
3. Slide the leg into the leg support located on the passenger
side ottoman and tighten the locking handle.
4. Press the table down onto the leg and tighten the locking
handle.
5. You can now adjust the table to the desired height and
location, ensure the locking handles are locked in place
while the table is in use.
6. This location will allow you to swivel your front seats and
have a dining or work area.
WARNING:
Ensure Lagun table latched in the storage position
before driving.
USB CHARGING PORT
Your motorhome is equipped with USB charging ports. Each
charging port features 2 USB slots that will fit a USB type A
connector. The 12 volt battery disconnect switch must be ON to
power the USB ports. The USB ports are protected by the DC Load
Center G12 module.
FRONT CAB PRIVACY SHADES
Fully form fitting to your windshield and cab doors, these shades
provide total privacy up front when needed.
1. Driver and passenger shades are magnetic.
2. Windshield shade is held in place with the visors.
