16
HOW TO USE THE LP APPLIANCES
Turn ON the 12 volt battery disconnect switch, located below the
entrance touchscreen control panel.
Twist the manual LP valve to OPEN on the LP tank.
BBQ QUICK CONNECT
The BBQ quick connect is directly connected to the RV LP system.
It is equipped with it’s own shut-off valve (black handle). The
quick connect is a regulated (low pressure) LP line that is supplied
from the onboard LP tank. The BBQ quick connect works with the
standard, full-flow male quick connect fitting. You will need a BBQ
that is set-up for a low pressure LP source.
BASIC OPERATION:
1.
Ensure the black valve is in the OFF position.
2.
Remove the yellow cap and ensure the opening is clean.
3.
Pull the sleeve of quick connect back and insert the male
quick connect fitting.
4.
Push the male fitting until the sleeve snaps forward, locking
the fitting into the socket.
5.
Connect your BBQ.
6.
Turn the black valve ON to allow propane to flow to the
connected BBQ.
7.
Ensure the propane tank valve is in an open position.
*LP hose and BBQ not included.
NOTE:
Propane will only flow from the BBQ quick connect
when there is a hose connected. This is a safety feature of this
component. The black valve must be in the OFF position to
release the hose from the quick connect.
