3101 111th Street SW
•
Suite F
•
Everett, WA 98204
425-353-7552
•
plcmultipoint.com
207
L
Re
v1
27
Gateway Commissioning & Start-up Guide
Creating Additional Zones
To create additional zones, start in the Zones View within the L Mobile App.
Tap the “+” symbol in the upper left-hand corner of the screen to create a new zone.
The procedure for configuring a new zone is identical to the process that was previously outlined.
To review this process again, refer to that document section.
Deleting a Zone
If necessary, a zone can be completely deleted from the installation.
Note: Devices that are assigned to a zone that is deleted will continue to remain
in the network and will appear if the scan process is completed once again.
There are two possible methods to delete a zone, as outlined in the following sections.
Primary Method for Zone Deletion
The primary method to delete a zone is within the Zones View within the L Mobile App.
Instructions on reaching the Zones View can be found on page 32 of this document.
Press and hold any visible zone icon, releasing once deletion buttons (red buttons with
an “x” in the center) appear in the upper left corner of each zone.
To abandon the deletion and retain all zones, tap anywhere on the lower screen and outside
of the deletion icon(s).
To delete a specific zone, tap the red deletion button in the upper left corner of the zone that
is intended to be deleted.
If the deletion icon is tapped, a confirmation screen will subsequently appear to help prevent
inadvertent deletions.
Tap “Yes” to proceed with the zone deletion, or “No” to keep the zone.
The screen will return to the Zones View with deletion buttons still visible to allow deletion
of additional zones. If no other zones exist, it will launch the Zone Setup process.
Secondary Method for Zone Deletion
A secondary method for zone deletion is available within the editing functions for
specific zone device lists. As the navigation is through a different path than what has
been covered thus far, this method is covered later in this document.