3101 111th Street SW
•
Suite F
•
Everett, WA 98204
425-353-7552
•
plcmultipoint.com
207
L
Re
v1
21
Gateway Commissioning & Start-up Guide
Once the scan process ends (or if the “Skip Ahead” button has been pressed), the
results screen will appear.
If the number of light nodes do not match up with the number that were expected, tap
“Scan Again” to attempt another search. See the Troubleshooting section of this docu-
ment for common solutions to devices not being discovered during scan.
Zones must include light nodes. If none are found during a scan for a new zone (one
with no existing devices), it is not possible to continue with the zone creation. In this
case, press the “X” in the upper left corner to exit the screen.
Once all lights have been identified, tap on “Continue”.