Step 22 Cont.:
Make sure brace is square to beam. Using the
brace as a template, drill a
³⁄₈
" hole completely
through beam.
(Fig. 3)
Secure the Sturdy-Frame Brace to the beam with
a
³⁄₈
" x 3½" hex bolt,
³|₈
" washer and
³|₈
" lock nut.
Locate the hole on the 2" x 4" board of tower assembly where the Swing
Station Assembly will be attached.
Position Swing Station Assembly against tower and secure with one
³|₈
" x 5"
hex bolt,
³|₈
" washers and
³|₈
" lock nut as shown.
Items for
STEP 23:
(1)
³|₈
" x 5" hex bolt
(2)
³|₈
" washers
(1)
³|₈
" lock nut
81
¹₄
"
to the
ground
Hole
81
¹₄
"
to the
ground
Hole
Drill
Fig. 3
22
