32
ANCHORING
At locations shown screw Playset Anchors into ground by hand (a long
screwdriver will help).
Use the anchor as a drill guide and drill a
¹⁄₄
" hole 1" deep into the board.
Attach with
³|₈
" x 1
¹⁄x
" lag screw and
³|₈
" washer.
A
Note: If soil conditions permit anchors to be pulled out easily, such as in sandy soil
conditions, cementing is required. If your ground is too hard to screw in the
anchors, or you are having trouble lining up anchor with existing hole in tower,
you can remove the earth with a shovel. Install the anchors and compact the
earth as you replace it. Anchors must be placed below the level of the shock-
absorbing surfacing material to prevent tripping or injury resulting from a fall.
Reminder: Be sure to install proper shock-absorbing surfacing material.
Refer to the Safety Guide at the beginning of this plan.
2
3
4
5
1
Items for
STEP 37
:
(5) Anchors
(5)
³⁄₈
" x 1
¹⁄x
" Lag Screw
(5)
³⁄₈
" Washers
