8
©
2006 Pacific Cycle, Inc.
2
Attach the two vertical poles to the glider
attachment. Start by removing the
hardware from the lower section of the
glider attachment. Align the vertical bar
with the glider attachment and re-insert the
hardware. Repeat the process for the other
side.
NOTE:
The curved portion of the pole is
the top and it should face the inside of the
swing frame.
Part Ref. #: PSHW21, PSHW36
3
Connect the two horizontal poles (must
first be disassembled from the seats) to the
two vertical poles using the hardware
provided. Be sure that the plastic bushings
are between the vertical poles and
horizontal poles.
Part Ref. #: PSHW15, PSHW11
4
Reattach the seats onto the horizontal poles
using the flat headed screw, washer, and
lock nut.
Part Ref. #: PSHW1
5
Once fully assembled, check that the glider
swings freely. If it does not, make sure
that the bolts holding the vertical poles to
the top bar attachment are not over
tightened.
Part Ref. #: PSHW21, PSHW36
