9
©
2006 Pacific Cycle, Inc.
SWING AND TRAPEZE ASSEMBLY
Pre-Assembled Parts
•
Swing seats should be attached to the chain.
Step Illustration
Instructions Hardware
Reference
1
Before attaching the swings,
you will need to verify the hook
positioning. Although the
hooks will be pre-assembled in
the top bar, their position may
need to be adjusted.
The hook assemblies shown at
left will need to be positioned
as shown for each ride with two
chains. Verify that the opening
in each swing hook points away
from the center of the ride.
This will insure that the swings
are properly spaced.
1
Hang the swings and trapeze in
place from the swing hooks.
2
Check the lock nut and bolt on
the swing seat to make sure that
they are secure.
Part Ref. #: PSSH11, PSHW13
