10
©
2006 Pacific Cycle, Inc.
SEE-SAW ASSEMBLY
Required Parts:
See-Saw Frame and Extension
Frame Attachment
Top Tube Attachment
Seat x2
Step Illustration
Instructions Hardware
Reference
1
Remove the hardware from the See-Saw
Frame and connect the extension. Re-
insert the hardware and tighten.
NOTE
: Be sure that the lower part of the
see-saw extension is buried and anchored
per the anchoring instructions on page 3.
Part Ref. #: PSHW10
2
Secure the See-Saw Frame to the leg of the
swing set frame with the hardware
provided on the leg.
NOTE:
Be sure that the see-saw frame
attaches to the leg on the opposite side of
the slide. If the leg with the holes is on the
same side as the support bar with the slide
attachments, it should be moved to the
other end.
Part Ref. #: PSHW10
3
Install the seats on the See-Saw Top Tube.
Check the nuts and bolts on the seat so that
they are secure.
Part Ref. #: PSHW16
4
Mount the pivot onto the See-Saw Frame.
The pivot should be between the two screw
heads, starting with the plastic bushing and
then the metal bracket.
5
Attach the See-Saw Top Tube to the pivot
using the hardware found on the Top Tube.
Part Ref. #: PSHW10