STEP 27: LEVEL SWING BEAMS
1: PLACE A LEVEL ON TOP OF THE SWING BEAM AND ADJUST THE BEAM LEGS IN OR OUT AS NEEDED TO MAKE THE
SWING BEAM LEVEL.
IN
IMPORTANT NOTE: THE LEGS ARE DESIGNED
TO ACCOMODATE SWING BEAMS ON
UNEVEN GROUND (DOWN SLOPE). THE
LEGS ARE LONGER THAN REQUIRED. IF
YOUR GROUND IS RELATIVELY LEVEL, YOU
MAY EITHER:
A) DIG IN BOTH LEGS WHERE THEY MEET
THE GROUND
OR
B) BEND THE LEGS OUT SLIGHTLY TO MATCH
YOUR GRADE.
OUT
63
