A
STEP 25: MOUNT SWING BEAM TO SWING BEAM LEGS
1: FASTEN THE SWING BEAM TO THE SWING BEAM BRACKET USING 3/8" X 7" CARRIAGE BOLTS WITH TORQUE
WASHERS ON TOP OF THE SWING BEAM, AND 3/8" LOCK NUTS WITH 3/8" WASHERS FROM UNDERNEATH.
2: USE A 3/8 X 3-1/2" LAG SCREW WITH 3/8" WASHER FOR THE HOLE IN THE CENTER OF THE SWING BEAM BRACKET.
PREDRILL A HOLE FOR THE LAG SCREW USING THE DIAMETER INDICATED BY THE INSTRUCTIONS AT THE FRONT OF
THE MANUAL.
3: PLACE A BOLT CAP OVER ANY EXPOSED THREADS.
4: REPEAT FOR THE SWING BEAM ON THE OTHER SIDE OF THE FORT.
SCALE 1 : 8
DETAIL A
3/8" x 7"
WASHER
TORQUE
LOCK NUT
CARRIAGE
BOLT
3/8"
WASHER
3/8"
BOLT CAP
3/8" X 3-1/2"
LAG SCREW
(DRILL PILOT HOLE
FOR THE DIAMETER
INDICATED IN THE
FRONT OF THE
MANUAL)
61
