10
Memory Storage
When the MEM button is selected, a series of values and icons appear in
the LCD display screen. See Table 5 for a description of the display screen
updates when Memory Storage is in use.
Table 5.
Memory Storage Icons and Values
Icons and Values
Description
Memory Storage
Locations
The unit has two memory storage locations: M1 and
M2. The selected storage location appears above
the NVP value in the lower left corner of the LCD
display screen.
NVP Value
The NVP value for the selected storage location
appears next to the “NVP” icon in the lower left
corner of the LCD display screen.
Adjustment Indicator
The adjustment indicator icon demonstrates that the
NVP value can be adjusted.
▪
The icon, displayed as two Up/Down arrows,
appears to the left of the NVP value.
Cable Length
The cable length, displayed in feet or meters, ap
-
pears in the upper right corner of the display screen.
When a cable is not attached to the Snap Shot™ the
length will read “0”.
Note:
Refer to the
Using Memory Storage
section to learn how to
store multiple NVP values for testing purposes.
Tone Mode
When the TONE button is selected, two musical notes blink in the lower
right corner of the LCD display screen to demonstrate the unit is set to
tone tracing. The following icons appear in the display screen when Tone
Mode is in use:
▪
Cadence
– There are four cadence options: HI, LO, HL1, and HL2. The
last selected cadence appears in the top row of the display screen.
▪
Adjustment Indicator
– Two arrows appear to the left of the
selected cadence to indicate that cadence can be adjusted.
Note:
A tone probe is used for the tone tracing functionality of the
Snap Shot™. This item is sold separately. Refer to the
Additional
Accessories
Section for a listing of available products.
