Plasmon LIBRARIES D2175, User Manual

Page: 23 / 90

Plasmon D875 - D2175 User Manual Library Installation
Document Revision E Page 21
Loading Media
There are two methods for loading media into the D875 - D2175 libraries:
•
High Speed Bulk Loading (recommended) : This method is intended as the first time solution to
mass load the library with media when the library is off-line. This method utilizes all six magazine
slots to load the library.
•
I/E Port Magazine Loading : This is intended for importing and exporting up to ten pieces of media
in a removable magazine while the library is on-line.
When loading the library for the first time, use the high speed bulk loading method described below:
1. Turn on the power.
2. From the front panel menu select Set Up Library>Offline Operations>Bulk Load Library.
3. Open the library front door and the magazine access door. Note that when the Bulk Load
Library option is selected, the magazine door opens.
4. Place a pre-loaded magazine in each magazine slot (magazine 1 through magazine 6).
5. When the green LED goes out, remove the appropriate empty magazine and install the
next full magazine.
NOTE
Third party software is required to operate the library
Figure 8. Magazine Slots
Magazine 2
1 - 10
Magazine 3
11 - 20
Magazine 4
21 - 30
Magazine 5
31 - 40
Magazine 6
41 - 50
I/E Slot
IE 1 - IE 10
Load Status
Indicator
Magazine Access Door
Magazine Eject
Button