background image

Self-Propelled Cultivator / Tiller 

 

 

E&OE 

©2017 Plant Craft 

Safety Symbols 

The product may have safety warning labels attached to it, explained below. Understand the symbols on 
your product and their meanings. If any stickers become unreadable, unattached etc, replace them. 

 

 

 

 

Flammable Material Hazard

 

Flammable liquids, gases or 

substances etc may present. 

Avoid ignition sources and 

open flames. Danger of fire. 

Read User Manual

  

Read and fully understand 

product safety warnings, 

operation, procedures etc 

before using the product. 

Use Hand Protection

 

Wear appropriate hand 

protection and take due care 

as the product or use of the 

product may present hand 

hazards. 

Carbon-Monoxide Hazard 

Do not use the product in 
confined areas or without 

adequate ventilation. Carbon-

monoxide poisoning can be 

fatal. 

 

 

 

 

Electrocution / Electrical 

Shock Hazard

 

High voltage or high current 

electricity may be present or 

required by the product. Take 

due care when handling 

electrical products, cables, 

plugs and leads. Electrical 

shock can be fatal.  

Toxic Fumes hazard

  

Using the product or by-

products from use may 

produce fumes, smoke or 

particles that could be harmful 

if inhaled. Wear appropriate 

breathing protection and have 

adequate ventilation. 

Explosive Material Hazard 

Combustible liquids, gases or 

substances etc may be 

present. Avoid ignition sources 

and open flames. Danger of 

explosion. 

Cutting / Amputation Hazard 

The product may have blades, 

edges or mechanical devices 

that can cause severe cut 

injury to fingers, limbs etc. 

Take due care when handling 

and using the product. 

 

 

 

 

Crush Hazard 

The product may have blades, 

edges or mechanical devices 

that can cause severe crush 

injury to fingers, limbs etc. 

Take due care when handling 

and using the product. 

Single Operator Only

 

The product must be operated 

by a single person only. More 

than one person operating the 

product may introduce 

additional hazards. 

Use Face Protection

 

Wear appropriate full-face 

protection and take due care 

as the product or use of the 

product may present face and 

eye hazards. 

Use Foot Protection

 

Wear appropriate foot 

protection and take due care 

as the product or use of the 

product may present foot 

hazards. 

 

 

 

 

Use Eye / Ear / Head 

Protection

 

Wear appropriate eye and / or 

ear and / or head protection 

and take due care as the 

product or use of the product 

may present eye, hearing and 

head hazards.

 

Running Hazard 

Do not run on or near the 

product as doing so may 

present a fall hazard. 

Diving Hazard 

Do not dive into the product as 

doing so may present a neck / 

head injury hazard.

 

Adult Supervision Required 

Always supervise children and 

other users of a product to 

prevent drowning or injury.

 

 

 

 

 

Skin Penetration / Puncture 

Hazard 

The product may produce 

pressure, emit liquids or 

objects that can cause severe 

injury to fingers, limbs, blood 

etc. Take due care when 

handling and using the 

product.

 

Hot Surface Hazard

 

Be aware that the product may 

produce high temperatures 

and hot surfaces that can 

cause burn injuries. 

Flying Debris Hazard 

Be aware that the product or 

use of the product may 

present hazards produced by 

flying debris. Wear appropriate 

clothing and protectiove 

devices. 

Moving Parts Hazard 

Be aware that the product 

contains or uses mechanical 

devices that move or rotate. 

Always wait for moving parts 

to stop fully before handling 

the product, adjusting, 

maintenence etc.

 

Summary of Contents for Self-Propelled Cultivator / Tiller



































Reviews: