Planmeca Planmeca ProMax 3D Classic User Manual Download Page 74

Page: 74 / 90

12 SETTINGS

70 Planmeca ProMax 2D & 3D s & 3D Classic

User’s Manual (2D)

12.2.3 Licences (2300)

•

To activate a program licence:

1. Select Program > 2300 Licences.
2. Select the licence you wish to activate.
3. Enter the licence code that you have received for this

licence on this X-ray unit.

4. Select the green check mark button.
5. Repeat for an other program licence if needed.
6. Select the green check mark button.

12.2.4 Reset to Factory Defaults (2500)

•

To reset to factory defaults:

1. Select Program > 2500 Reset to Factory Defaults.
2. Select the green check mark button.

NOTE

The function will restore the exposure values that have

been preset at the factory (i.e. overrule your own settings

in menu Programs (2100)).

Summary of Contents for Planmeca ProMax 3D Classic



























































































Search results

Summary of Contents for Planmeca ProMax 3D Classic

Reviews:

Related manuals for Planmeca ProMax 3D Classic

Brands by name

Popular brands

Planmeca Planmeca ProMax 3D Classic, User Manual

Search results

Summary of Contents for Planmeca ProMax 3D Classic

Reviews:

Related manuals for Planmeca ProMax 3D Classic

Brands by name

Popular brands