Planmeca Planmeca ProMax 3D Classic User Manual Download Page 41

Page: 41 / 90

9 PANORAMIC EXPOSURE

User’s Manual (2D)

Planmeca ProMax 2D & 3D s & 3D Classic 37

9.4 Selecting Dynamic Exposure Control (DEC)

NOTE

Dynamic Exposure Control (DEC) is an optional feature for

Planmeca ProMax 2D units.

NOTE

DEC and vertical segmenting can be used simultaneously.

However, the right-most vertical segment cannot be

deselected.

NOTE

DEC and horizontal segmenting cannot be used

simultaneously.

Select the DEC button.
Dynamic Exposure Control (DEC) automatically provides

optimal exposure values for each patient during exposure.

The function adjusts the exposure values individually for

each patient based on their anatomic structure and bone

density. Switching DEC on improves the image quality as

the function produces images of more consistent

brightness and contrast.
When DEC is switched on the exposure values are

automatically adjusted during exposure. The kV value is

adjusted by max ±4 kV and the mA value is adjusted by

max +4 / -3 mA within the available scale.

9.4.1 Adjusting DEC density

If the images appear to be too bright or too dark, DEC

density can be adjusted. Select Settings > Program >

2200 Program Features > Pan DEC Density and use the

minus or plus sign to adjust the setting.
The setting can be adjusted between 20% (lower

exposure values -> brighter image) and 200% (higher

exposure values -> darker image). The recommended

setting is 100% (default setting).

Select DEC button

Summary of Contents for Planmeca ProMax 3D Classic



























































































Search results

Summary of Contents for Planmeca ProMax 3D Classic

Reviews:

Related manuals for Planmeca ProMax 3D Classic

Brands by name

Popular brands

Planmeca Planmeca ProMax 3D Classic, User Manual

Search results

Summary of Contents for Planmeca ProMax 3D Classic

Reviews:

Related manuals for Planmeca ProMax 3D Classic

Brands by name

Popular brands