Planmeca Planmeca ProMax 3D Classic User Manual Download Page 10

Page: 10 / 90

4 SAFETY PRECAUTIONS

6 Planmeca ProMax 2D & 3D s & 3D Classic

User’s Manual (2D)

NOTE

FOR EUROPEAN USERS:

The patient positioning lights are class 1 laser products

(Standard IEC / EN 60825-1: 2007).

NOTE

EMC requirements have to be considered, and the

equipment must be installed and put into service according

to the specific EMC information provided in the

accompanying documents.

NOTE

Portable and mobile RF communications equipment can

affect the X-ray unit.

NOTE

External equipment intended for connection to signal

input, signal output or other connectors, shall comply with

relevant IEC standard (e.g. IEC 60950 for IT equipment

and the IEC 60601 series for medical electrical

equipment). In addition, all such combinations - systems -

shall comply with the standard IEC 60601-1-1, Safety

requirements for medical electrical systems. Equipment

not complying to IEC 60601 shall be kept outside the

patient area (more than 2m (79 in.) from the X-ray unit).

Any person who connects external equipment to signal

input, signal output or other connectors has formed a

system and is therefore responsible for the system to

comply with the requirements of IEC 60601-1-1. If in

doubt, contact your service technician or local

representative for help.

NOTE

Contact your service technician if you notice a decrease in

image quality.

NOTE

Contact your service technician if you have taken an

exposure but the image does not appear in the Planmeca

Romexis program. The last ten images can be manually

imported into Romexis.

NOTE

Never place or hang any objects on any part of the X-ray

unit.

NOTE

Make sure that neither you nor your patient can get caught

or hooked up on any part of the X-ray unit. Keep loose

items of clothing, hair and jewellery tucked away safely.

NOTE

If you have any reason to believe that the C-arm might hit

the patient during exposure (e.g. patients with wide

shoulders), take a test exposure without radiation first. To

turn radiation off, select Settings > User > 1300

Operational settings > 1310 Use Mode > 1311 Set Demo

Mode.

CLASS 1 LASER PRODUCT

APPAREIL À LASER DE CLASSE 1

IEC 60825-1:2007

Summary of Contents for Planmeca ProMax 3D Classic



























































































Search results

Summary of Contents for Planmeca ProMax 3D Classic

Reviews:

Related manuals for Planmeca ProMax 3D Classic

Brands by name

Popular brands

Planmeca Planmeca ProMax 3D Classic, User Manual

Search results

Summary of Contents for Planmeca ProMax 3D Classic

Reviews:

Related manuals for Planmeca ProMax 3D Classic

Brands by name

Popular brands