12 SETTINGS
64 Planmeca ProMax 2D & 3D s & 3D Classic
User’s Manual (2D)
•
To control audio settings:
1. Select User > 1300 Operational Settings > 1320
Audio Settings.
2. Use the minus or plus button to reduce or increase
the volume of the radiation warning tone.
3. Select the green check mark button.
•
To manage settings for patient positioning:
1. Select User > 1300 Operational Settings > 1330
Patient Positioning.
2. Turn an option(s) ON or OFF:
•
Side Entry:
Turn this option OFF if you do not wish to use the
open (full view) patient entry position. This might
be necessary if there is no space for the C-arm
to move back.
NOTE
Planmeca ProMax 2D S2 units offer only one patient
entry position. This entry position is the closed patient
entry position where the C-arm is positioned around
the temple supports.
•
Midsagittal and Frankfort Lights in Tomo:
Turn this option ON if you wish to use the
midsagittal and Frankfort plane lights when you
take 2D tomographic or 3D exposures.
•
Temple Supports:
Turn this option OFF if you do not wish to use the
temple supports.
•
Return C-arm Automatically:
Turn this option ON if you wish to set the X-ray
unit so that the C-arm will automatically return to
the starting position at the end of an exposure
cycle. Note, however, that the automatic function
works only if the exposure button is pressed and
held down for the entire duration of the
exposure.
Summary of Contents for Planmeca ProMax 3D Classic
Page 1: ...PlanmecaProMax 2D 3D s 3D Classic EN 10033256_8 user s manual 2D imaging ...
Page 2: ......
Page 88: ......
Page 89: ......