Planmeca Planmeca ProMax 3D Classic User Manual Download

Page: 54 / 90

10 TEMPOROMANDIBULAR JOINT (TMJ) EXPOSURE

50 Planmeca ProMax 2D & 3D s & 3D Classic

User’s Manual (2D)

10.4 Taking an exposure in double TMJ programs

NOTE

Make sure that you have selected the correct patient and

exposure mode in the Planmeca Romexis program.

10.4.1 First exposure - jaw closed (1/2)

1. Select the forward button.

Green lights flash on the touch screen and exposure

button when the X-ray system is getting ready for an

exposure. The green lights stop flashing and stay on

continuously when the X-ray system is ready for an

exposure.

2. Ask the patient to stay as still as possible. Explain to

the patient that this is a double exposure and that the

C-arm will move twice around the patient’s head.

3. Move to a protected area.

4. Press and hold down the exposure button for the

duration of the first exposure.
The C-arm moves around the patient’s head. During

exposure yellow radiation warning lights illuminate on

the exposure switch and on the touch screen, and

you hear a radiation warning tone. Additionally, a

radiation warning symbol is shown on the touch

screen.

NOTE

Maintain audio and visual contact with the patient and X-

ray unit during exposure. If the C-arm stops moving during

exposure, or moves in an erratic way, release the

exposure button immediately.

NOTE

If needed, you can stop the imaging process by touching

the red cross button after you have taken the first

exposure.

Forward
button

w_wall6_2.eps

Green light

Fla

hing green =

Getting ready

Continuou

green =

Ready

._2eps

Yellow light

Red cro

button

Summary of Contents for Planmeca ProMax 3D Classic



























































































Search results

Summary of Contents for Planmeca ProMax 3D Classic

Reviews:

Related manuals for Planmeca ProMax 3D Classic

Brands by name

Popular brands

Planmeca Planmeca ProMax 3D Classic, User Manual

Search results

Summary of Contents for Planmeca ProMax 3D Classic

Reviews:

Related manuals for Planmeca ProMax 3D Classic

Brands by name

Popular brands