Copyright Planika Sp. z o.o.
www.planikafires.com
IG0266#03
02.06.2020
13
4.2
Start-up of the device
•
Make sure that the knob is
placed in „OFF” position
(all the way clockwise) (Photo 4).
Photo 4
•
Open the valve on gas cylinder.
•
Press the knob and while still pressing turn it counter-clockwise from position (1) to position (2)
Photo 5
•
While keeping the knob still pressed start the flame by pressing the ignition button (3).
Photo 6
•
A spark will appear which ignites the main burner on the minimum flame height. If the flame did not ignite
repeat this process 2-3 times. This will be required especially when you have replaced and installed a new LPG
gas cylinder.
•
When the flame is ignited keep holding the knob for around 5 seconds until the thermo-couple, which will
keep the main valve in an open position, warms up.
OFF
1
2
3
