Copyright Planika Sp. z o.o.
www.planikafires.com
IG0266#03
02.06.2020
14
•
You may now release the knob. If however the flame is extinguished repeat the process once again until a
stable flame is achieved.
•
WARNING!!!
After 2-3 unsuccessful attempts terminate and check the connections. Try again in 10 minutes.
If the installed gas bottle is new or the fireplace has not been used for a longer period the first thing that needs
to be done is to release air from the gas linkage. In this case conducting a few attempts will be needed until
the flame is ignited.
4.3
Regulation of the flame size
•
When the flame is burning the desired height of the flame may be adjusted and regulated by turning the knob
clockwise or counter-clockwise.
•
To achieve a higher flame turn the know clockwise to “
Hi”
position. To achieve a lower flame turn the knob
counter- clockwise
to “
Lo
”
position (Photo 7).
Photo 7
4.4
Device shutdown
•
To turn off the device, simultaneously press and turn the knob all the way clockwise (Photo 8). The gas supply
will be cut and the flame on burner will be turned off.
Photo 8
•
Additionally, close also the valve on the gas cylinder.
OFF
Hi
Lo
