background image

Copyright Planika Sp. z o.o.  

www.planikafires.com 

 

IG0266#03 

02.06.2020 

 

1.

 

INTRODUCTION 

The Galio Corten/Black Manual fireplace is a decorative fuel-effect gas appliances destined only for outdoor use.

 It 

is  obligatory  to  acquaint 

oneself  with  the  below  installation  manual  and  user’s  manual  before  committing  to  the 

installation and use of The Galio Corten/Black Manual fireplace. This manual is to be kept safe for the lifetime of the 
device. 
 

2.

 

SAFETY INSTRUCTIONS 

 

Read the instructions before using the appliance. 

 

Use outdoors only. 

 

The Galio Corten/Black Manual fireplace should be installed and controlled annually according to the below 
installation manual as well as enforced national and local laws regarding gas safety (installation and use). 

 

One needs to assess whether the data on the product plaque complies with the local type of gas and pressure. 

 

Do not change the structure of the device or its sealed elements nor modify the default settings of The Galio 
Corten/Black Manual fireplace. 

 

Do not set any additional imitation blocks nor any glowing coal fragments on the burner or in the combustion 
chamber.  

 

A CO2 or a powder fire extinguisher needs to be placed near the device. 

 

During the first ignition The Galio Corten/Black Manual fireplace needs to be burnt on maximum level for a 
few hours in order for the elements to acquire correct temperature and for the remains of paint, lacquer and 
lubricant to evaporate. 

 

Do not move the device while it’s working.

 

 

Galio Corten/Black Manual has been designed for decorative purposes. The surface of The Galio Corten/Black 
Manual fireplace including the glass screens may get hot (up to 100 degrees Celsius) with the exception of the 
side walls of the appliance and the control panel. 

WARNING!!!

 Parts of the device that are easy to reach may 

be very hot. Keep children away from the device. 

 

Glass panels must be installed when Galio Corten/Black Manual is in use. 

 

This  appliance  must  be  kept  away  from  flammable  materials  during  use.  Do  not  place  any  combustible 
materials within a distance of 1 m of Galio Corten/Black Manual and 2 m over the appliance (Figure 1). 

 

Figure 1: Minimum distance to flammable materials 

 

When The Galio Corten/Black Manual 

fireplace is on it’s not to be 

exposed to rain. 

 

When not being used The Galio Corten/Black Manual is to be protected from atmospheric conditions and the 

main valve of the gas cylinder needs to be turned off. 

 

If The Galio Corten/Black Manual is not in use for a longer period of time (e.g. winter time), we advise you to 

store it inside. 

Summary of Contents for Galio Black



















Reviews: